Todays how to video is on removing and replacing your upper control arm and ball joint on your chevy truck. its a pretty simple do it yourself job, that just. Chevy CK PickupFront Upper Regular Control Arm Bushing by MAS. Quantity: 1 per Pack. Restore your factory feel and ride quality with strong and reliable control arms and components.
Made to look, fit, and function just like the. 2.) Position the upper shaft in the a-arm and slide one bushing over each end as shown. 3.) Spray the bushings and the inner parts of the a-arm where the bushings go with spray lube. This will reduce the friction as you press the bushings into the a-arm and over the shafts. 4.) Cut a bar from old stock the length of the.
Oct 21, Nothing wrong with replacing your bushings, no need to replace the whole arm as the Arm itself is NOT a wear item, bet was though is the replace the shaf as 99% of the time the inner sleeve for the pivot bushing is rusted to the shaft anyway, so order up some new bushings and a new set of shafts and cut your current shaft in half and then use a. Sep 01, Chevy & GMC Vans. The premier site for GM van information.
does anyone know hoe to remove those upper control arm bushings as mine simply won't move at all. My sub frame is finally out of the van and replacing all suspension and steering parts, but i can't do it without replacing the upper control arm bushings. any feed back will be greatly. Jan 06, Chevy K upper contol arm bushings.
tinkering.PM Will I be able to change the passenger's side upper control arm bushings without separating the ball joint? I need to change the shocks too; will disconnecting the shock increase the maneuverability of the upper control arm enough to get those bushings changed.